FULLY AUTOMATIC BLOW MOLDING MACHINE

The Fully Automatic Blowing Machine is applied with the most advanced international technology of maching bottles nowadays. The machine has the characteristics of automatization, high intelliggence, stable and reliable preformance, high effiency and low cost. The products are not polluted in the production links and are widely used in the production of food, beverage, cosmetics and medicine vessels.

Preformance and Advantages:
1. Being stable and reliable in automatic unscrambling and the feeding which is automatically controlled by the inventory.
2. Well-closed, no contamination.
3. Prefect oven heating system.
4. Stable revolution & rotation system.
5. The perform tubles are evenly heated easy to module during heating.
6. Less energy consumption and the heating temperature of each section of the perform tube can easily be adjusted when needed.
7. The heater tank adopts the automatic mutual feedback-loop control system and the output of constant power can be conducted automatically in proportion and is not subject to the influences of the voltage fluctuation.

Technical Parameters:
BLOWING
Number of Cavities: 3
Height(Below Bottle Neck): 1.5 m

WARM SYSTEM
Warm Unit: 4
No. Of Warm Lamp: 6
Max. Heating Power: 30 kw

ELECTRICAL
Voltage: 220/380 V
Frequency: 50/60 Hz
Service Power: 12-18 Kw/h
Total Power: 35 Kw

AIR SYSTEM
Operating Pressure: 8-10 bar
Air Consuming: 0.8-1.0 m3/min
Blowing Pressure: ≥ 30 bar
Air Consuming: 1.2-2.0 m3/min

COOLING
Operating Pressure: 2-4 bar
Flow Rate: 3 m3/h

WEIGHT
Total: 2.6 T

DIMENION
Main Machine: 2500*1600*2050 mm
Perform Loader: 2500*1350*2550 mm
Use area: 2950*3450*2550 mm

CONTAINER
Neck Diameter Range: Φ 12 mm-φ 32 mm
Body Diameter: Φ 20 mm-φ 70 mm
Bottle Height (Below Neck): ≤ 240 mm
Container volume: 0.05 L-0.75 L

Material: PET
Theoretical Output: 3000BPH(500ml PET Bottle) according to the bottle shape
MACHINE COLOR: Blue, gray (according your requirement to change).